(note - this is unchanged from the original JamMan)
Program # | Description |
0 | Tap |
1 | Punched Reset |
2 | Phrased Reset |
3 | Punched Replace |
4 | Phrased Replace |
5 | Layer |
6 | Punched Mute |
7 | Phrased Mute |
8 | Short Fade |
9 | Medium Fade |
10 | Long Fade |
11 | Cue Loop 1 |
12 | Cue Loop 2 |
13 | Cue Loop 3 |
14 | Cue Loop 4 |
15 | Cue Loop 5 |
16 | Cue Loop 6 |
17 | Cue Loop 7 |
18 | Cue Loop 8 |
19 | Start/Stop loop |
Program # | Description |
0 | Tap |
1 | Sample Reset |
2 | Sample Reset |
3 | Foward/Reverse Toggle |
4 | Foward/Reverse Toggle |
5 | Foward/Reverse Toggle |
6 | Foward/Reverse Toggle |
7 | Foward/Reverse Toggle |
8 | Trigger Level 1 |
9 | Trigger Level 3 |
10 | Trigger Level 5 |
11 | Trigger Level 7 |
12 | Trigger Level 9 |
13 | Trigger Level 11 |
14 | Trigger Level 13 |
15 | Trigger Level 15 |
16 | Stop Sample Playback (new) |
17 | Loop Sample (toggle) (new) |
18 | -- |
19 | -- |
Stop Sample Playback
This feature allows you to stop the playback of a sample at any time.
Loop Sample
This allows you to create a sample then loop it (as in the looping mode). Note that MIDI clock is not supported.
Program # | Description |
0 | Tap |
1 | Bypass |
2 | Bypass |
3 | Divide by 2 |
4 | Divide by 2 |
5 | Divide by 3 |
6 | Divide by 4 |
7 | Divide by 4 |
8 | Feedback 1 |
9 | Feedback 3 |
10 | Feedback 5 |
11 | Feedback 7 |
12 | Feedback 9 |
13 | Feedback 11 |
14 | Feedback 13 |
15 | Feedback 15 |
16 | Feedback 16 |
17 | Toggle Infinite Repeat (new) |
18 | Toggle Full Feedback (new) |
19 | Toggle Input Mute Bypass (new) |
Toggle Infinite Repeat
This allows you to infinetly repeat (loop) the contents of memory when in the Echo mode.
Toggle Full Feedback
This allows you to toggle between a defined feedback level and full feedback. Very useful for building textured layers with the feedback at full then allowing them to decay with a lower feedback level.
Toggle Input Mute Bypass
Instead of muting both the input and the output of the Echo (as the normal bypass does), this version only mutes the input to the Echo. This is extremely useful for playing over layered echos without adding new content.
Also see..