Stec Special ROM V0.4 Users Guide
Channel Level
<go
back to table of contents>
The Stec Special ROM allows the signal level of each loop to be individually
adjusted. Descrete MIDI
continuous controllers are available to adjust each mixer channel but
the individual levels can be set by selecting a channel on the front panel,
selecting the "Level" parameter and turning the Select knob. You can also
adjust the level of a channel when it is "active" (just initialized or
selected for editing with Functions).
The default on power up is for all channels in all pages to be
at full level (16) if the memory backup (EEPROM)
is not installed. The front panel resolution of this parameter is 16 positions
but 128 via MIDI.
