Thanks for the reply, Bob. I checked my delay parameters and it is already set to Tap MS. However, the tap light still isn't blinking on the G2 or the R1 and I don't have tap control of the time parameter. I am able to assign delay mix and level to the gas pedal and I also have an A/B that cuts the delay but lets it ring when EQ is on. So, patching is working, in general. Is there a corresponding patch I need to set up to link the tap button? I have been able to set up a patch with Auto Learn for the tap button as the destination. The source values (max, min) both say 0, though, so I may not have it set up correctly because even with that, no workie.