I have had several emails come in about the gas pedal (programmable pedal) being or getting to loose. You can adjust the tension on the pedal tighter or looser. This is an easy fix. Looking at your R1 siting on the floor or table facing you, look to the right side panel of the enclosure, you will see a hole. If you look in the whole you will see a phillips screw head. By tightening or loosening this screw you can adjust the pedal tension. So if your pedal is getting to loose tighten the screw till the tension feels right for your preference.
Mapex Pro M Maple standard, Pearl 800 series cymbal stands, Vex hi hat stand, Pearl P201P double bass pedals, Tama mid level throne, All Zildjian A cymbals, 21" Rock Ride, 18" med thin crash, 16" med thin crash, 10" splash, 14" new beat hi hats.